CMM Calibration Service

CMM CALIBRATION SERVICES

Similar to a machine center, calibrations can be performed on a Coordinate Measurement Machine (CMM) to define and verify geometric deviations in straightness, rotation, linearity, angularity and squareness. our experienced CMM technicians are able to define these parameters with the highest degree of accuracy using best in class measurement systems and reporting deviation analysis.

*If you don't see your brand of hardware or software listed, please contact us to discuss our available calibration options for your brand of equipment and software.

Featured Calibration Services

Cleaning of Machine
A thorough cleaning of the surface plate, guide ways, and scales are done at the beginning of each calibration.
Reader Head and Scale Evaluation
Reader heads of each axis are checked using an oscilloscope and adjusted to the best possible output. Scales of the machine visually inspected.
Probe Evaluation and Repeatability
Each axis is checked using your probe when applicable.
Beam/Plate Parallelism Inspection
Beam and plate parallelism are checked to the machines working surface.

Volumetric Test
A full volumetric test will be completed, adjustments will be made accordingly.
Inspect and Adjust Machine Squareness
Measurements are taken in the XY, ZX, and ZY directions and adjusted accordingly.
Linearity Check
X, Y, and Z Linearity checked and adjusted as needed.
Calibration Certificate
An official calibration sticker and certificate will be issued after each calibration.

Recent Reviews

East Coast Metrology average rating:
4.8 out of 5 based on 153 reviews.

11/23/21
North Billerica, MA

Karl K.
1/28/21
Lyndonville, VT

Steve J.

Thank you.