3D Metrology Press

ECM will host the Coordinate Metrology Society's NEW Metrologist in Training (MIT) Assessment Test at this year's Quality Show along with a brief overview of the TWO separate Level-One CMS Exams; one for Portable 3D Metrologists and one for Traditional CMM Experts.

Topsfield, Massachusetts: On August 5, 2021, ECM Global Measurement Solutions announced a partnership with TECMED-3D, a dimensional measurement and metrology equipment rental company based in Monterrey, Nuevo Leon, Mexico.

Topsfield, Massachusetts: On July 7, 2021, East Coast Metrology, LLC. (ECM Global Measurement Solutions) announced its immediate expansion into Canada through a partnership with Precitech Metrology, a full-service 3D metrology and precision alignment company based in Montreal, Quebec.

The ASQ Inspection Division has selected ECM Global Measurement Solutions’ metrology engineer, Jon McLaughlin, as the 2021 Chuck Carter International Inspector of the Year. McLaughlin will be acknowledged at an award ceremony to be held later this year.

Do you have a surplus of metrology equipment you no longer need? ECM can help you sell your pre-owned equipment.

MIT Graduate and Principle Engineer Tom Kinnare, talks about his profession and his career at ECM at the request of local educators.

This year, we celebrate 20 years in business. Though we celebrate what we have accomplished, we continue to raise the bar a little higher each time we succeed. Thank you for being an essential part of our success!

In these trying times of the COVID-19 Virus, ECM has the health and wellbeing of our employees, families, and our customers at the forefront of our concerns.

Topsfield, Massachusetts: On September 15, 2020 East Coast Metrology, LLC. (ECM – Global Measurement Solutions) announced their new collaboration with Renishaw as an Authorized Distributor in the Northeast.

Topsfield, Massachusetts: East Coast Metrology, LLC. (ECM – Global Measurement Solutions) announces the opening of a new training, service, calibration and retrofit facility in Wixom, MI.

Kristofer Martin will be heading up the rapidly growing calibration services division for the privately-owned, global, metrology services company effective May 2020.

ECM today announced that Pete Edmonds will be joining the privately-owned, global, metrology services company as Vice President of Business Development.

Construction Tech Review Magazine named ECM – Global Measurement Solutions the winner of “Top 10 BIM Consulting/Services Companies 2020."

As an Essential Subcontractor to the Federal Government we will continue to provide the same outstanding support that you can expect from our dedicated workforce.  

Actus3D Merges with ECM – Global Measurement Solutions to Expand 3D Scanning Solution Portfolio for Architecture, Engineering, and Construction Industries

Level-One and Level-Two Certification assessments for measurement professionals are designed to recognize key skills and knowledge essential to the workplace today.

Military Aviation Logistics and Maintenance Symposium

Additional dates just added to our metrology training class schedule for 2019! If you've been on the fence, now is the time to pull the trigger and sign up for one of our upcoming courses today!

Using a Renishaw XR20 Rotary Axis Calibrator coupled with a XL80 linear measurement interferometer, ECM is able to measure all geometric axis in a machine independently and with extreme accuracy.

This event combines interactive presentations, technology demos and operational processes along with networking with industry experts.

ECM teaches the local Rowley Girl Scouts a thing or two about Metrology and Engineering as they work toward their next badge.

With the new Leica AT960 with T-Probe and T-Scan, ECM can collect data on small detailed parts, and also perform fast scanning of larger parts.

ECM Hosts Exclusive First Collaboration of National Laboratory Experts in Creating Industry's First CMM Certification Examination

ECM Launches New Website Offering More Services and Features than Ever Before.

Looking to advance your career? Join us at the CMSC Conference in Reno and learn more about Metrology Certification

Guest Gary Confalone, Current Chair of Coordinate Metrology Society (CMSC). Talks about importance of Metrology in today's society.

ECM, among others prepares students for the real world at the SkillsUSA competition put on by the Boston Tooling & Machining Association.

A Full Service Metrology Company specializing in 3D Laser Surveying and Scanning Services. Think of ECM for your next 3D Laser Scanning job!

A team of highly qualified industry experts works hard to develop the testing criteria for the addition of CMMs for Metrology Certification Assessment

Proceeds benefit the Floating Hospital for Children at Tufts Medical Center and the Boston Bruins Foundation.

It starts with passion. Each year, my company, ECM Global Measurement Solutions, is invited to participate in an ever-increasing number of events

CMSC Corner as seen on Quality Digest: Lukasz Turolski Discusses the Power of CMS Certification

CMSC Corner as seen on Quality Digest: Gary Confalone Assumes Chair Position on the Coordinate Metrology Society.

ECM - Global Measurement Solutions has officially been awarded approved supplier status for Rolls-Royce Corporation.

ECM Visits Great Bay Community College in Rochester, NH to present Laser Measurement as a non-destructive testing (NDT) process.

The shortage of women pursuing careers in fields like science and engineering continues to be a challenge for companies.

ECM Helps DEN 8 Cub Scouts From Rowley, MA Earn Their Engineering Badge

Live on Quality Digest: How You can Prepare for your Level-One Certification. Check out our CMS Preparatory Course.

ECM and NRK Team up to Host SA Lunch-n-Learn at ECM Headquarters

Introducing Gary Confalone, President and CEO of ECM as the New Vice Chair of the Coordinate Metrology Society

Engineering Day is a special day when professional engineers visit classrooms and converse with students and teachers about careers in engineering.

Gary Confalone (CEO of ECM) Appointed onto Board of Directors for PrecisionPath Consortium

ECM Launches New 3D Surveying Division to Meet High Demand for AEC Customers

A2LA Grants ECM Expanded Scope for ISO/IEC 17025:2005 Accredited Laboratory

ECM Participates in the Annual Girls Technology Day at the New Hampshire Technology Institute

Article written by Gary Confalone, CEO of ECM Global. First published in Quality Digest Daily.

ECM hosts first offsite CMS Certification for 3D Metrology – Level 1 Testing.

ECM Presents Paper, “Evolutionary Approach to Automation” at Upcoming SA Users Group Conference.

ECM Takes Delivery of New Hexagon Programmable CMM to Meet Growing Demand for Small Part Inspections

ECM Becomes North American Training Partner for the National Physical Laboratory

Students get humor, fun, and lessons on metrology day. ECM speaks at local school STEM event.

Gary Confalone, President and CEO of ECM is Elected to Executive Committee of CMSC for 2nd consecutive year.

ECM Engineer, Matt Turolski Presents Technical Paper at the 30th Annual Coordinate Metrology Systems Conference in North Charleston, SC. 

Challenges of Neutron Guide Alignment at the NIST Center for Neutron Research presented at Hexagon Live in Las Vegas, NV.

A2LA Grants ECM Expanded Scope for ISO/IEC 17025:2005 Accredited Laboratory

ECM Launches New Website for 3D Scanning and Large Scale Metrology Services

ECM Becomes First in Industry to Host the CMS Certification Training Class for 3D Metrology